M4100 switch Intelligent Edge ranging from 8-port Fast Ethernet to 50-port Gigabit Ethernet


Netgear M4100 Managed Gigabit & 10Gbe Switches

Manufacturer

— Netgear

SKU

— M4100 Series

Description

Netgear M4100 series delivers a secure edge in commercial buildings and campus LAN environments: PoE (802.3af) and PoE+ (802.3at) versions of M4100 series are perfect for Wireless access points, IP telephony and IP surveillance deployments.

Features

  • Port-based / VLAN-based / Subnet-based
  • Automatic multi-vendor Voice over IP prioritization

Share this product

Enquire about this product

Image Alt

The NETGEAR Intelligent Edge M4100 series consists of 12 fully managed switches, ranging from 8-port Fast Ethernet to 50-port Gigabit Ethernet. They are ideal for all organizations considering reliable, affordable and simple access layer switching with CLI, advanced scripting capabilities and Layer 3 routing. As a cost-effective component of converged voice, video and data networking solutions, NETGEAR M4100 series delivers a secure edge in commercial buildings and campus LAN environments: PoE (802.3af) and PoE+ (802.3at) versions of M4100 series are perfect for Wireless access points, IP telephony and IP surveillance deployments.


Layer 2+ with static routing

  • M4100 series comes with Port-based / VLAN-based / Subnet-based
        "static routing" Layer 2+ versions

  • L3 fixed routes to the next hop towards the destination network
        are added to the routing table.

  • L3 routing is wire-speed in M4100 series hardware with 64 static
        routes (IPv4

Engineered for convergence

  • Automatic multi-vendor Voice over IP prioritization based on
        SIP, H323 and SCCP protocols

  • Voice VLAN and LLDP-MED for automatic IP phones QoS and
        VLAN configuration

  • Advanced classifier-based hardware for L2, L3, L4 security
        and prioritization

  • Advanced Multicast filtering with IGMP and MLD snooping
        and querier modes

High-value performance and IPv6 ready

  • 16K MAC addresses; up to 100Gbps switching fabric; 9K jumbo and
        frames; Green Ethernet

  • IPv4/IPv6 ingress traffic filtering (ACLs)
        prioritization

High-value performance and IPv6 ready

  • Redundant power supply option for uninterruptible operation
        (RPS)

  • External power supply option for PoE and PoE+ full power
        applications (EPS up to 1,440W)

Industry Standard Management

  • Industry standard command line interface (CLI)

  • Fully functional NETGEAR web interface (GUI)

Industry Leading Warranty

  • NETGEAR M4100 series is backed by NETGEAR
        ProSafe Lifetime Hardware Warranty†

  • Also included ProSupport Lifetime 24x7
        Advanced Technical Support*

  • Advanced classifier-based hardware for L2, L3, L4 security
        and prioritization


NETGEAR M4100 Series

As a cost-effective component of converged voice, video and data networking solutions, NETGEAR M4100 series offers ideal, advanced features for a secure edge in commercial buildings and campus LAN environments.

  • High availability and PoE/PoE+ full power capability

  • Industry standard management

  • Industry leading warranty

  • Layer 2+ with static routing

  • Engineered for convergence

  • High-value performance and IPv6 ready

Performance

  • Layer 3 hardware with L2+ software affordability

  • Built upon L3 hardware platform while Layer 2+ software package allows for better budget optimizationt

  • Uses latest generation silicon low-power 40-nanometer technology

  • L2 and L3 switching features (access control list, classification, filtering, IPv4 routing) are performed in hardware at interface line rate for voice, video, and data convergence

  • Engineered for convergence

  • Layer 2+ software package provides straight forward IP static routing capabilities for physical interfaces, VLANs and subnets

  • 16K MAC address table, 1K concurrent VLANs and 64 static routes for SMB and small enterprise access layers

  • Increased packet buffering with up to 12 Mb dynamically shared accross all interfaces for most intensive applications

  • Low latency at all network speeds

  • Jumbo frames support of up to 9Kb accelerating storage performance for backup and cloud applications

  • Broad portfolio of access layer solutions, ranging from 8 ports Fast Ethernet to 50 ports Gigabit Ethernet

Connectivity

  • IEEE 802.3af Power over Ethernet (PoE) provides up to 15.4W per port

  • IEEE 802.3at Power over Ethernet Plus (PoE+) provides up to 30W per port

  • Desktop versions can be powered by upstream PoE+ switch

  • M4100-D12G-POE+ can even redistribute PoE power from the upstream PoE+ switch to VoIP phones or other devices in meeting rooms, retail sales floors or other challenging environments without outlet

  • Both IEEE 802.3at Layer 2 LLDP method and 802.3at 2-event classification methods are supported for compatibility with all PoE+ PD devices

  • Automatic MDIX and Auto-negotiation on all ports select the right transmission modes (half or full duplex) as well as data transmission for crossover or straight-through cables dynamically for the admin

  • 100Mbps backward compatiblity on all SFP ports

  • IPv6 support with multicasting (MLD for IPv6 filtering), ACLs and QoS


Ease of Use

  • Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface

  • Placement outside the wiring closet (conference rooms, offices, class rooms, sales floor in retail stores, etc)

  • For secure deployment in open areas , desktop versions come with a Wall Mount Kit with four brackets

  • Select desktop versions also come with a set of strong magnets for mounting on any metal surface

  • Automatic configuration with DHCP and BootP Auto Install

  • Both the Switch Serial Number and Switch primary MAC address are reported by a simple "show" command in the CLI

  • Automatic Voice over IP prioritization with Auto-VoIP

  • An associated Voice VLAN can be easily configured with Auto-VoIP for further traffic isolation

  • When deployed IP phones are LLDP-MED compliant, the Voice VLAN will use LLDP-MED to pass on the VLAN ID, 802.1P priority and DSCP values to the IP phones, accelerating convergent deployments

  • DHCP/BootP innovative auto-installation including firmware and configuration file upload automation

  • Dual firmware image and configuration file for updates with minimum service interruption

Security

  • Traffic control MAC Filter and Port Security

  • DHCP Snooping monitors DHCP traffic between DHCP clients and DHCP servers to filter harmful DHCP message and prevent DHCP spoofing attacks

  • IP source guard and Dynamic ARP Inspection for malicious users traffic elimination

  • Layer 2 / Layer 3-v4 / Layer 3-v6 / Layer 4 Access Control Lists (ACLs) can be binded to ports, Layer 2 interfaces, VLANs and LAGs (Link Aggregation Groups or Port channel) for fast unauthorized data prevention and right granularity

  • Bridge protocol data unit (BPDU) Guard allows the network administrator to enforce the Spanning Tree (STP) domain borders and keep the active topology consistent and predictable - unauthorized devices or switches behind the edge ports that have BPDU enabled will not be able to influence the overall STP topology by creating loops

  • Spanning Tree Root Guard (STRG) enforces the Layer 2 network topology by preventing rogue root bridges potential issues when for instance, unauthorized or unexpected new equipment in the network may accidentally become a root bridge for a given VLAN

  • Dynamic 802.1x VLAN assignment mode, including Dynamic VLAN creation mode and Guest VLAN / Unauthenticated VLAN are supported for rigorous user and equipment RADIUS policy server enforcement

  • 802.1x MAC Address Authentication Bypass (MAB)

  • Double VLANs (DVLAN - QoQ) pass traffic from one customer domain to another through the "metro core" in a multi-tenancy environment

  • Private VLANs (with Primary VLAN, Isolated VLAN, Community VLAN, Promiscuous port, Host port, Trunks) provide Layer 2 isolation between ports that share the same broadcast domain

  • Secure Shell (SSH) and SNMPv3 (with or without MD5 or SHA authentication) ensure SNMP and Telnet sessions are secured

  • TACACS+ and RADIUS enhanced administrator management provides strict "Login" and "Enable" authentication enforcement for the switch configuration and authentication based on user domain in addition to user ID and password

NETGEAR Warranty

  • This product is backed by a NETGEAR ProSAFE® Lifetime Hardware Warranty.

  • Lifetime Next Business Day Hardware Replacement. Click here for coverage, availability and terms and conditions.

  • ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.

  • ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues).

Data Sheet

 Download M4100datasheet (2900KB)




M4100 Specifications


Netgear Business Network solution
Netgear M4100-D12G
Part Number GSM5212-100AJS/EUS
Description ProSafe™ 12-Port Layer 2 Managed Switch with 4 SFP(Shared)(Supported: AGM731F, AGM732F)
RJ45 Ports 12 x 10/100/1000
Fiber SFP(100/1000) 2 x SFP
PoE/PoE+ n/a
PoE Budget (Watts) n/a
R. Power Supply PD Mode
Powered by PoE+ (Passthrough) 1 x PoE+ 30W port in
Feature Set Layer 2+ (static routing)
Form Factor Desktop

Netgear Business Network solution
M4100-12G-POE+
Part Number GSM7212P-100AJS/NES
Description ProSafe™ 12-Port PoE Gigabit, Layer 2 Managed Switch with 4 SFP(Shared) Port 1-12
RJ45 Ports 12 x 10/100/1000
Fiber SFP(100/1000) 4 x SFP
PoE/PoE+ 12 x PoE+ 802.3at
PoE Budget (Watts) 380W
R. Power Supply RPS
Powered by PoE+ (Passthrough) n/a
Feature Set Layer 2+ (static routing)
Form Factor Rack 1U - Standalone
Netgear Business Network solution
M4100-26G
Part Number GSM7224-200EUS/AJS
Description ProSafe™ 24 RJ45 Port Gigabit Layer 2 Managed with 4 SFP (Supported: AGM731F, AGM732F)
RJ45 Ports 26 x 10/100/1000
Fiber SFP(100/1000) 4 x SFP
PoE/PoE+ n/a
PoE Budget (Watts) n/a
R. Power Supply RPS
Powered by PoE+ (Passthrough) n/a
Feature Set Layer 2+ (static routing)
Form Factor Rack 1U - Standalone
Netgear Business Network solution
M4100-50G
Part Number GSM7248-200EUS
Description ProSafe™ 48 RJ45 Port Gigabit Layer 2 Managed (Supported: AGM731F, AGM732F)
RJ45 Ports 50 x 10/100/1000
Fiber SFP(100/1000) 4 x SFP
PoE/PoE+ n/a
PoE Budget (Watts) n/a
R. Power Supply RPS
Powered by PoE+ (Passthrough) n/a
Feature Set Layer 2+ (static routing)
Form Factor Rack 1U - Standalone

Netgear Business Network solution
M4100-24G-PoE+
Part Number GSM7224P-100AJS/NES
Description ProSafe™ 24-Port Gigabit POE+ & Layer 2 Managed with 4 SFP(Shared), PoE Budget 380W upto 720W
RJ45 Ports 24 x 10/100/1000
Fiber SFP(100/1000) 4 x SFP
PoE/PoE+ 24 x PoE+ 802.3at
PoE Budget (Watts) 380W / 720W EPS
R. Power Supply RPS
Powered by PoE+ (Passthrough) n/a
Feature Set Layer 2+ (static routing)
Form Factor Rack 1U - Standalone
Netgear Business Network solution
M4100-50G-PoE+
Part Number GSM7248P-100AJS/100NES
Description ProSafe™ 50-Port Gigabit POE+ & Layer 2 Managed with 4 SFP(Shared), PoE Budget 380W upto 1,440W
RJ45 Ports 50 x 10/100/1000
Fiber SFP(100/1000) 4 x SFP
PoE/PoE+ 48 x PoE+ 802.3at
PoE Budget (Watts) 380W / 1,440W EPS
R. Power Supply RPS
Powered by PoE+ (Passthrough) n/a
Feature Set Layer 2+ (static routing)
Form Factor Rack 1U - Standalone
Netgear Business Network solution
GSM7226LP-100NES
Part Number GSM7226LP-100NES
Description ProSafe™ 26-Port Gigabit Layer 2 Managed 4 SFP, 24-Port PoE PoE Budget 192W upto 380W with RPS
RJ45 Ports 26 x 10/100/1000
Fiber SFP(100/1000) 4 x SFP
PoE/PoE+ 24 x PoE 802.3af
PoE Budget (Watts) 192W / 380W EPS
R. Power Supply RPS
Powered by PoE+ (Passthrough) n/a
Feature Set Layer 2+ (static routing)
Form Factor Rack 1U - Standalone


Kaira Technologies © Copyright 2015, All Rights Reserved